2.installation
Step 3 : Install the sensor t o the correct tire
1. Locked valve nut.
2. Adjust the sensor to the appropriate angle and then lock the hex screws
3. Use a torque wrench to set the torque to 40-45 kgf-cm (4-4.5 Nm) and lock the nut.
4. Put the appropriate pressure, and then lock the Valve nut.
Precautions :
1.
This product is an auxiliary safety product, please check the tire use situation regularly.
2.
When this product warns, please be careful and stop the roadside check the tire condition.
3.
If you use chemical sealants or special tires to fill chemical substances will make this
product lose its function.
