12
GB
G
ATTENTION!
We hereby explicitly state that we have no li-
ability whatsoever under the German Prod-
uct Liability Law for any damage caused as a
result of unauthorised repairs or by the use of
replacement parts that were not original
GLORIA spare parts, and where the repair
work was not done by our after-sales service
section or an authorised technician. This also
applies to accessory parts.
Equipment
G
Safety / pressure relief valve
(A)
G
Pump assembly complete
(B)
G
Pressure reducing valve with manometer
(C)
G
Compressor connection
(D)
G
Suction nipple
(E)
G
Flat spray nozzle
(F)
G
Felt washer
(G)
Intended Use
G
The industrial device FM50 is designed for
foaming liquid cleaning agents as far as
those agents do not affect the materials
used.
G
The device may only be used for applying
media which are suitable for foaming. Foam
formation is influenced by:
1. the concentration of the medium in the
solution.
2. the water hardness.
3. the disposition of the medium to foam.
4. the number of felt washers
(G)
used.
DANGER!
Danger of life from fire and/or explosion!
Danger to life if the device is not used as in-
tended! For this reason, observe the following
safety instructions:
G
When handling hazardous substances al-
ways wear appropriate protective clothing,
including protective gloves and breathing
protection. Avoid any sources of ignition in
the vicinity and ensure that the work
place is well ventilated.
G
Inflammable media may not be applied
with this device.
WARNING!
Contact with cleaning fluids poses a
health risk!
Inhaling, swallowing or skin contact with
cleaning fluids may impair your health to
some extent. If symptoms occur, or in case
of doubt, consult a doctor. Consult a doctor
if you develop symptoms or are unsure.
F+
For this reason, observe the following safety
instructions:
- Observe the safety instructions on the
cleaning substance labels. Safety goggles,
protective gloves or other protective
measures are advised when using certain
foam cleaners.
- Always request a safety data sheet as per
EWG 91/155 from the manufacturer of the
medium to be sprayed
and comply with
instructions.
All manuals and user guides at all-guides.com
