Technical Data
Solid state class D powered bass amplifier, 19" rack mountable, 2 rackspaces high.
Inputs
1 Jack ¼” A for basses with normal output level, 3 MΩ
1 Jack ¼” B for basses with higher output, additional pre-damping control, 4.7 MΩ
Equalization
Bass
+/- 15dB 60Hz
Low
+/- 12dB 130Hz
Mid
+/- 12dB 200Hz – 4KHz
Treble +/- 15dB 8kHz
Outputs
1 Tune Send
Jack ¼”
1 Balanced DI Out XLR, pin 1 ground, pin 2 , pin 3 signal -, adjustable level
2 Speakers
Speakon, pin 1+ and 2+ signal hot, pin 1- and 2- signal cold
1 Phones
Stereo-jack ¼”
Effects
1 Parallel Loop, post eq, with mix feature (0-100%) and footswitch activation, also
usable as MP3 input (stereo input ¼” jack).
Switches
1 Input A/B (activates Input A or B)
1 Tune (cancels all outputs without Tune Send)
1 Eq On
1 Effect On
1 Power On
1 Ground Lift
1 DI pre/post Eq
1 Loop Return mono / MP3 In stereo
1 Footswitch jack Tune On
1 Footswitch jack Effect On
Special Features
Class A input stage
LED Overdrive Indicators for Pre-Amp and Power Amp
LED Indicators for all switch functions
Built in A/B box with separate damping control for Input B
DI-Out adjustable (on left side by screwdriver)
Output Power:
700 watts@4 Ω, 350 watts@8 Ω DIP-switches ON
or
700 [email protected] Ω, 475 watts@4 Ω, 240 watts @ 8 Ω
DIP-switches OFF
Frequency Range:
20 Hz to 20 KHz -1dB
Power Requirement:
200-260 V AC, 5A slo / 90-130V AC, 8A slo
Dimensions:
320 x 88 x 260 mm (12.6 x 3.5 x 10.2")
Weight:
5 kg (11 lbs)
