Bass Art Classic Preamp
Technical Data
Transistor Instrument-Preamp, 19“ 2 units
Inputs
1 XLR 4-pin for Line-Driver (pin 1 ground, pin 2 signal, pin 3 +15V, pin 4 –15V),
connected to Input B, will be disconnected by jack-plug in Input B jack
1 Jack (1/4“)
A for passive basses and active basses with low output level, 2.5MΩ
1
Jack (1/4“) B for active basses, 4.5MΩ, additional pre-damping control,
disconnects XLR Line Driver when used
Equalizer
Bass
±15 dB
60 Hz
Treble
±15 dB
12 KHz
Low Mid
±12 dB
45 - 900 Hz
High Mid ±12 dB
0,3 - 6 KHz
Outputs
1 Tune Send
Jack (1/4“)
1 Line Out
Jack (1/4“)
1 Line Out
XLR, (pin 1 ground, pin 2 , pin 3 ground),
opt. transformer-symmetric (then pin 1 ground, pin 2 , pin 3 signal -)
1 balanced DI-Out XLR, with level-control (pin 1 ground, pin 2 , pin 3 signal -)
Effect-loops
1 serial Insert, pre Eq
1 parallel Loop, post Eq, with mix feature (0-100%) and frontswitch and footswitch activation,
internally switchable to intensity of 0 to 50% with no changing of original-level,
adjustable Basscut (25 – 500 Hz) in Send output
Switches
1 Input A/B (activates Input A or B)
1 Tune (cancels all outputs without Tune Send)
1 Treble/Bass Eq On
1 Low Mid/High Mid Eq On
1 Effect On
1 Power On
1 Ground Lift
1 DI pre/post Eq
1 Footswitch jack Tune On
1 Footswitch jack Effect On
1 Insert On
Special features
Class A preamp-technique
LED Peak indicators
LED Indicators for all switch functions
Built in A/B box with separate damping control for input B
Frequency range:
20 Hz to 25 KHz -1dB
Power requirement:
230 V AC / 1 A slo - USA 117 V AC / 2 A slo
Australia 245 V AC / 1 A slo - Japan 100 V AC / 2,5 A slo
Dimensions :
483 x 88 x 170 mm (19“ x 3,5“ x 6,7“)
Weight:
2,7 kg (6 lbs)
