![GLOCKENKLANG Bass Art Classic User Manual Download Page 2](http://html1.mh-extra.com/html/glockenklang/bass-art-classic/bass-art-classic_user-manual_2234134002.webp)
Thank you for choosing the GLOCKENKLANG
Bass Art Classic Preamplifier. You have
purchased an exquisite piece of equipment,
which was designed after the most modern
technical aspects.
For your safety
Please read the following instructions
carefully. These tips will ensure long and
troublefree operation of your new
GLOCKENKLANG product.
Operational restrictions
Do not operate the amplifier under the
following conditions:
•
In direct sunlight
•
In extremely dirty or dusty places
•
In extremely humid or wet places
•
Around heat emitting appliances
Caution: When rack mounting the amplifier,
make sure to leave adequate room for
ventilation. The unit needs this ventilation
space to adequately exhaust it´s internally
generated heat.
Care
Use a soft, clean and dry cloth only to clean
the amplifier. Do not use aggressive
chemicals to clean the housing. Do not use
compressed air to clean the housing. You
may carefully vacuum the air intake and
exhaust areas from time to time to remove
loose dust accumulation.
Please, keep this User Manual for future
references
WARNING!
TO REDUCE THE RISC OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
Handling
Do not drop the amp. Do not use excessive
force when activating switches and dials.
General instructions
Your Bass Art Classic preamp´s special
features:
• 2 effect loops
"insert" is a serial loop
"effect" is a parallel loop with
blending control from 0% till 100% on the
front panel.
The insert is switched pre eq, the
effects loop is switched post eq/pre
volume control/pre DI out.
The effect loop is internally switachable
–
with the dip-switch in off position, behind
the effect control pot
–
to an effect-
intensity from 0 till 50% with an equal
level of original signal, which gives you a
small rise of the whole level by adding
the effect level.
Caution:
Please ensure adequate ventilation when
rack mounting the Bass Art Classic
preamp.
Leave a minimum of 5 mm space below
and above the amplifier.
WARNING!
TO REDUCE THE RISC OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.