During this adjustment, the display will
show the message WAIT E.. and the red
LED will illuminate until the wheels have
reached the set speed.
Adjusting electronic control with Fast Control System
The motor control lets you vary the speed of the 2 motors and it is essential to define tra-
jectories, speed and effects for serves, attacks and settings.
pag 11
Turn on the control unit with the main
switch on the left-hand side. When the
machine is turned on, all the parame-
ters are set at zero (speed, spin).
To start spinning the shooting wheels,
select a previously set memory or increa-
se the speed and / or the spin.
When the wheels reach the desired
speed that was set before, the red LED
turns off, and the green LED illuminates
to indicate that the machine is ready to
roll, i.e. shoot a ball with the correct
parameters. The display indicates
READY.
winshot 1500 rev. 13.ENG.stamp.pdf.qxd 29-08-2013 9.32 Pagina 12
