Page 13
Operating Instructions (Default PLU)
The GSP30A scale is designed to print the following information:
PLU Name, Extra Message, Sell By Date, Packed Date, Unit Price, Tare,
Weight, PLU Number, Total Price, Bar Code, Store Name, Store Address
The PLU number, name, extra message, sell by date, packed date will
need to be setup (see page 9 for instructions).
Operating Instructions For Default PLU
Make sure that the labels are loaded before using the scale, refer to page 6 for instructions.
The scale is preprogrammed with a default PLU number 1, which has no product name, price, or tare. This allows
the scale to be used as a basic label printing scale without PLU’s. If you want to set up PLU’s, refer to page 9 for
instructions.
1. Make sure the scale is plugged in, the platter is on top of the
scale, the scale is turned on and the operating keysheet is
placed under the plastic covering. NOTE: The display will
show all zeros except in the price area, which will show
000001.
2. If a tare is needed, do one of the following steps:
a. Place the empty container on the platter and press the TARE key or...
b. Enter the tare amount and press the TARE key.
3. Enter the product price.
4. Place the product on the platter. The display will show the tare, weight, unit price and total price.
5. Press the PRINT key for a label to print.
Normal Operating Keysheet