Page 10
Setting Up A Default PLU
NOTE: The scale is preprogrammed with a default PLU number 1, which has no product name, price, or tare.
This allows the scale to be used as a basic label printing scale without PLU’s.
• When a default PLU is set up, the scale will return to the default PLU after each transaction instead of clearing
to no PLU.
• The default PLU can be used to bypass entry of a PLU for each transaction.
• A different PLU may be recalled at any time to override the default PLU during normal operation.
1. Make sure the scale is plugged in, turned on, and there is nothing on the platter.
2. Key in 9000 and press the MODE key. The display will show: P00 REGISTRATION
NOTE: If this does not appear on the display, press the RESET key to clear any data and do the step again.
3. Key in 8 and press the ENTER key.
4. Key in the PLU number (max 5 digits) and press the ENTER key. To disable the default PLU, key in 0 and
press the ENTER key. NOTE: This will force the entry of a preset PLU number to operate the scale.
5. Press the MODE key to return to normal operation.
Deleting A PLU
1. Make sure the scale is plugged in, turned on, and there is nothing on the platter.
2. Key in 9000 and press the MODE key. The display will show: P00 REGISTRATION
NOTE: If this does not appear on the display, press the RESET key to clear any data and do the step again.
3. Key in 1 and press the ENTER key.
4. Key in the PLU number and press the PLU key.
5. Press the DELETE key two times. There will be a long beep, which notifies you that the PLU has been
deleted.
6. Press the MODE key to return to normal operation.
PLU Set Up