Page 9
Operating Instructions
TIMER FUNCTION MODE
START/STOP:
Once a timer button has been selected, push the Start/Stop button. Start begins the timer count down.
To stop or pause timer, press Start/Stop button a second time. Display will blink once every second.
To continue timer, press Start/Stop button again to release it from paused/stopped function. The timer will begin to
count down the selected programed time to 0. Once timer has timed out, display will blink 00:00 and unit will beep five
times.
To stop timer blinking 00:00, repeat the last selected time by pressing Start/Stop button one time OR select 1, 2, 3 or
4 to select a new preset time.
Select Start/Stop to begin timer again.
Program time setup buttons:
1. Select one of the program buttons, 1, 2, 3, or 4, once.
2. Display will show the Factory default value.
MENU
1
2
3
4
Factory default
00: 30
01: 00
01: 30
02: 00
Adjustable time
0: 01-15: 00
0: 01-15: 00
0: 01-15: 00
0: 01-15: 00
3. Select a preset and then press START/STOP button to begin timing the boil to selected time/preset .
Note:
Once a program button has been selected and it begins countdown, all other buttons are inoperable except
Start/Stop button. Select Start/Stop button to pause/stop timer as needed.
If time needs to be added or a new time selected, press Start/Stop button to stop or pause timer, then press 1, 2, 3, or
4, to reset your time. Next, press Start/Stop button to continue cooking time.
RESET 1, 2, 3, OR 4 PRESET TIME:
To reset/adjust a preset time up or downward:
1. Make sure pasta cooker is on. If needed, use Start/Stop button to stop all functions.
2. Press one of the program buttons (1, 2, 3, or 4) one time.
3. Display will show preset time.
4. Press desired program button a second time. Display will begin to blink
5. Press
s
or
t
arrow button to the desired time. (Time accumulates by 5 seconds each time the
s
or
t
button is pressed).
6. After 3 seconds of inactivity, timer will be set with the entered time.
Once time has expired or proper cooking time has elapsed, carefully lift baskets out of water and hold them over pot
to drain water from pasta before serving.
Note:
If unit stops working or display is blank (not showing anything) press any button to display 00:00.
IMPORTANT:
Continually monitor and maintain water level in boiling pan. Water level will decrease with each boil.
Note:
In higher elevations above sea level, evaporation occurs more quickly.