Page 21
Endweight Slide Rod
The endweight slide rod should be lubricated weekly (or when excessive drag is felt)
with a few drops of Globe oil.
1. Add a few drops of Globe oil to the slide rod (Fig. 21-1).
2. Slide the endweight up and down several times to distribute the oil.
Sharpener
It is necessary to lubricate the sharpener shafts with Globe oil once per month.
1. Raise the sharpener cover.
2. Raise the sharpener up into position.
3. Pull up on the sharpener knob and place a couple drops of Globe oil
on the shaft (Fig. 21-2).
4. Lower the sharpener back to its original position.
5. Pull up on the honing stone and put a couple drops of Globe oil on the
shaft (Fig. 21-3).
6. Move the stone up and down a couple of times to distribute the oil.
7. Pull the lever counterclockwise and hold it in that position while you place a
couple drops of Globe oil on the other sharpener shafts (Fig. 21-4 and Fig. 21-5).
8. Move the lever back and forth several times to distribute the oil.
9. Wipe off any excess oil.
10. Close the sharpener cover.
11. Wipe off any excess oil that might have
gotten on the slicer.
Other Lubrication
It is recommended that all threaded screws
be lubricated after each cleaning to maximize the life of your slicer.
Simple Maintenance and Repair
Slide Rod
Figure 21-1
Figure 21-3
Figure 21-2
Figure 21-5
Figure 21-4
Lever
Summary of Contents for 3600P
Page 2: ......
