Globe Scientific GCC-E User Manual Download Page 16

© 2019 Globe Scientific Inc. All rights reserved. The Globe Scientific logo is a registered trademark of Globe Scientific Inc.          GCC-E Manual 19134

15. Warranty                           

This centrifuge is guaranteed for two years from the date of delivery provided that it has been operated and maintained 
properly. 

This centrifuge is guaranteed for two years from the date of delivery provided that it has been operated and maintained 
properly. 

Instances that would void the warranty include:

1. Failures caused by incorrect installation.

2. Failures caused by rough or improper handling. 

3. Failures caused by transportation or relocation after installation.

4. Failures caused by unauthorized disassembly or modification.

5. Failures caused by using non-standard spare parts or accessories and/or unauthorized modification of the rotor or 

centrifuge. 

6. Failures caused by natural disasters including fire, earthquakes, etc. (force majeure).

16. Service

To ensure safe and efficient operation of your GCC series centrifuge, it is necessary to keep the centrifuge clean and to use 
as recommended in this manual. If centrifuge has problems, do not attempt to repair it by yourself. In the unlikely event you 
require service or assistance, please contact Globe Scientific at:

E-Mail:

[email protected] 

Sales and Technical Support:

1 800-394-4562 ext. 2
1 201-599-1400
1 201-599-1406 fax

International Sales:

1 201-599-1400
[email protected]  

®

Customer Service:

1 800-394-4562 ext. 1
1 201-599-1400
1 201-599-1406 fax

Address:

Globe Scientific Inc.
400 Corporate Drive
Mahwah, New Jersey 07430
USA

Summary of Contents for GCC-E

















Reviews: