Installa�on Instruc�ons
GlobaLux Ligh�ng LLC
– 2037 S. Vineyard Ave. Ontario, CA 91761 – 909-591-7605 Fax: 909-590-3220
www.globaluxligh�ng.com
RIS9709
3/3
LNS Series
1. Adjust CCT switches on each board accordingly to the desired color temperature as seen below.All boards
must be set the same way.
Note
:Fixture is preset to 3000K from factory.Power to fixture must always be turned OFF prior to adjus�ng
CCT switches.
Color Changing Temperature Adjustment, CCT (if desired).
3000K 4000K 5000K 3000K 4000K 5000K 3000K 4000K 5000K
COLOR TEMPERATURE ADJUSTMENT SETTING
IMPORTANT SAFE PRACTICES
Fig 5
LED Array
LED Drive
r
White
Black
Com
Line
GND
Fixture Body
Black
Red
Grey
Purple
1-10V (-)
1-10V (+)
B.
Plug the white and black wine of JBox into the quick connector.And connec�ng fixture by quick connector.
Connect the ground wire(Green),dimmable wire+(purle) and dimmable wire-(gray) of JBox to fixture by wire nut.
Step 7
.
Take the LED module plate back to the fixture.
Step 8.
Take the lens back to the fixture.Ensure assemble proper posi�on.
Step 9.
Push up the fixture in the moun�ng barcket on the ceiling.
Step 10.
Turn power on and verify that the fixture is lit.
Fig 6
