(QJOLVK
Clock (Menu 4)
Set (Menu 4 1)
This function sets the following in sequen-
ce: clock (displayed at the top right of the
display) and, after its confirmation, date.
In both cases, press
to pass from
one item to the other.
Later this function sets the day: select the
required day by pressing
and con-
firm.
Alarm (Menu 4 2)
This function sets the alarm-clock and the
days for activation. After setting and con-
firming the time, use
and
to se-
lect the required items (press
to
enable and a second time to disable the
selection) and, on completion of selection
(s), confirm.
Note:
The symbol
X
next to selection means
that it is enabled; the alarm-clock will be
activated even if the phone is switched
off: in this case, following activation, con-
firmation is requested or the option to
reject activation: the telephone switches
off automatically if no key is pressed.
Settings (Menu 5)
Audio (Menu 5 1)
This function enables you to change the
tone and volume of the ring signal.
Personalising the ring signal
To personalise the ring signal, enter sub-
menu (5 1 1 1 followed by keys
or
up to 9) and, after pressing
,
enter the required notes (max.80 inclu-
ding pauses), then confirm.
¨
the composition of a note requires its
specific entry, the sharp sign (if relevant)
and its duration.
¨
press the same key again to change the
letter from upper to lower case thereby
changing the octave (higher frequency).
¨
the sharp sign must be entered imme-
diately after the relative letter.
¨
the duration of the note can be extend-
ed by pressing the relative key (9) repea-
tedly (up to four times).
¨
the duration of the pause can be ex-
tended by pressing the relative key (0) re-
peatedly (up to four times).
¨
scroll through items by means of keys
and
.
¨
errors are displayed by a flashing cursor
at the point of the error.
¨
press
to listen to the melody
composed.
