GTCAM Quick Start Guide
This document will be updated without any notice.
© 2012
www.GlobalScaleTechnologies.com
page
2
of
8
1.
Introduction, Package List, System Requirement and Recommended User Distance
1.1 Introduction
There are only 3 steps you need to install and use GTCAM:
(1)
Register one Skype account on PC for your GTCAM.
(2)
Connect GTCAM to PC via mini-USB cable, run setup program and enter your friends’ Skype account.
(3)
Login Skype on your PC or mobile phone with one of the friends’ account then call GTCAM.
1.2 Package List
(1) GTCAM x 1
(2) Power Adapter: DC 12V/1A x 1
(3) Mini-USB to USB cable x 1
(4) Quick start guide x 1
1.3 System Requirements
The following items are required to use the GTCAM:
(1) Two Skype account
(2) PC with a USB port
(3) 10/100 Base-T Ethernet or home Wi-Fi access point.
(4) Windows XP/ Win7/ Win8 based computers
1.4 Recommended User Distance
Suggest use the GTCAM 1m away from the microphone to get a better user experience.
2.
Setup GTCAM Hardware
2.1 Connect the GTCAM to PC via mini-USB to USB cable.
2.2 Connect the Power Adapter (12V/1A) to the camera and plug it into an AC 100~240V Outlet.
1. Audio Jack
2. Micro-SD slot
3. Reset (See note #1)
4. Mini-USB port
5. GTCAM stand
6. Ethernet port
7. Power port
8. Wifi Antenna
1
2
4
3
5
7
6
8
Note #1
Use a pin-like tool such as paper clip to press the reset button:
1.
A short press around will not restart the system.
2.
A long press about 10 seconds will bring back the system to factory settings which mean all your personal configurations will be lost.