TR-151SP
page 28
5.2.2 How to configure TR-151SP by GPRS server?
You can send command by GPRS server to configure following parameters into TR-151SP.
There are 9 settings as below.
SMS Default Report Phone Number
Maximum GPS Fixing Time
Default Report Mode Setting
SOS Numbers
Motion setting
GPRS setting
Normal Setting
On-line Setting
Cell ID setting
Report type
Format
Return message
SMS Default
Report Phone
Number
$7,IMEI,1,Enable_SMS Default Report Phone Number,
SMS Default Report Phone Number!
$OK!
Maximum GPS
Fixing Time
$7,IMEI,2,Maximum_GPS_Fixing_Time!
$OK!
Default Report
Mode Setting
$7,IMEI,3,Default_Report_Mode,Report_Interval,Number_of_Reports,R
eport_Format,Report Phone Number For Default Report Mode!
$OK!
SOS Numbers
$7,IMEI,4,SOS1,SOS2,SOS3!
$OK!
Motion Setting
$7,IMEI,5,Regular Report Interval,Motion report
Interval,Sensitivity,Motion_Report_Number!
$OK!
GPRS Setting
$7,IMEI,7,Port,APN,User_Name,User_pwd,DNS1,DNS2,Host_Name,R
eturn_Phone_Number!
$OK!
Normal setting
$7,IMEI,8,Name,Time_Zone,Report_method,Echo_EN,Return_Phone_
Number!
$OK!
On-line setting
$7,IMEI,B,Enable/disable_GPRS_on-line,disconnect and re-connect
interval, Return_Phone_Number!
$OK!
Cell ID
$7,IMEI,C,Enable/disable_Cell_ID,Return_Phone_Number!
$OK!
SMS Default Report Phone Number: Set SMS Default Report Phone Number.
Maximum_GPS_Fixing_Time:
If GPS is not fixed within the time, it returns previous location and close GPS. The unit is in minutes.
Parameter value range: 3~10 minutes, default value: 5 minutes
Default_Report_Mode:
Default_Report_Mode = 0
SMS immediate report
Default_Report_Mode = 1
SMS period report
Default_Report_Mode = 2
Stop
Default_Report_Mode = 8
GPRS immediate report
Default_Report_Mode = 9
GPRS period
Default_Report_Mode = 10
GPRS period and disconnect
Default_Report_Mode = 16
Motion report
Default_Report_Mode = 21
SMS and GPRS immediate report
