3
Repeat this procedure twice more.
NOTE: Repeat this procedure every two months if the watch is not used or recharged regularly.
Configure your watch for First Use
The first time you power on the watch, you will set up language, units, date/time, time format and
personal profile.
1
Press and hold
for more than 2 sec to power on the watch. The watch then begins the
first-time setup process.
1.1
If first-time setup does not begin, press
to go to the main menu, then select
SETTINGS >
ABOUT > RESET > OK!
The watch then enters factory reset process and turn power back on
automatically.
2
Follow the instructions shown in the watch’s display, using
,
,
and
.
Configure your watch before workout
This section intends to assist you to customize your GH-209. The sequence of items is referring to the
actual watch screen except PAIR due to its importance we move it to independent session.
1.
GENERAL
1.1
Language
1.1.1
Currently offer English only. We will provide more language options for your choice in near
future.
1.2
ALARM
1.2.1
When you set up a time and turn alarm
ON
, you will receive buzzer alerts when time is up.
Also the vibration alert if you turn on alarm vibration (
SETTINGS > GENERAL >
VIBRATION > ALARM > ON
).
1.3
DATE, TIME
1.3.1
To choose 24H or 12H system.
1.3.2
Configure your local date and time.
1.4
SOUND
1.4.1
Turn ON in KEY, buzzer will beep when you push buttons.
1.4.2
Turn ON in WORKOUT, buzzer will beep in a unique sound when you push
to
GO,
PAUSE
for a run.
1.5
VIBRATION
1.5.1
Vibration alert for ALARM, TARGET and NOTICE.
1.5.2
Turn
ON
for
ALARM
to vibrate when set up time is up.
1.5.3
Turn
ON
for
TARGET
to vibrate when you out of target zone that you’ve indicted.
7
Summary of Contents for GH-209
Page 1: ...GH 209 GPS BLE 6 23 15 SL ...
