TALK-100 User’s Manual 4
GL
OBALINX
®
TALK
-100
The TALK-100 is designed for easy configuration and installation.
Follow these quick steps to start using your GLOBALINX® service:
4
Installing the Talk-100
Computer
Telephone
DSL or Cable
Modem
Internet
LED Status Lights
Installing without a Router
A
B C
E
F
It’s fast and easy to set up your Telephone Adapter! Just follow these simple steps:
Insert the provided blue Ethernet Cable into the blue
WAN port
[B]
of the Telephone Adapter. Connect the other
end of the Ethernet Cable to an Uplink port of the DSL or Cable Modem.
If you do not have a Router you can connect a PC to the yellow
Ethernet port
[C]
of the Telephone Adapter with
a second Ethernet cable (not included).
Insert the provided Power Adapter into the
Power Connection
[A]
and connect the other end to a wall outlet.
Allow up to 5 minutes to fully boot up before placing a call.
Connect a standard touch-tone analog telephone to the Telephone Adapter. To do this, insert the telephone cable
into the
Phone 1 port
[E]
and connect the other end of the telephone cable to the telephone.
When the
Phone
1 LED Status Light
[F]
turns a solid color, your service is ready to use.
1
STEP #
2
STEP #
3
STEP #
4
STEP #
5
STEP #
DO NOT UNPLUG AT THIS TIME OR YOU WILL DAMAGE THE UNIT
.
Telephone
Adapter
IMPORTANT NOTICE, READ FIRST!
Once you have connected the Power Adapter into the Power Connection of
the device it may take up to 5 minutes to activate your new Telephone Adapter
and get it connected to the GLOBALINX
®
network. DO NOT unplug the power or
Internet cable during this waiting period or you will damage the unit. When the
Phone 1 Status Light turns a solid color, your service is ready to use.
If all LED Status Lights flash green simultaneously, DO NOT unplug
power Ethernet cords. This means the device is automatically upgrading.
NOTE:
