Rotary Hoe
11
Fig. 5 : Cover for the working widths of 12 and
18 cm.
1) Top cover for the
working widths of 12 and
18 cm
2) Cover holder
3) Right side
4) Left side
5) Washer 5.2
6) Self-locking nut M5
7) Hinged cover for the
working widths of 12 and
18 cm
The figure shows a cover
for the working width of
12 cm. In the case of the
working width of 18 cm,
the sides get mounted to
the edge line of openings
– A.
Fig. 6 : Cover for the working widths
of 28 and 34 cm.
1) Top cover for the
working widths of
28 and 34 cm
2) Cover holder
3) Right side
4) Left side
5) Washer 5.2
6) Self-locking nut
M5
7) Hinged cover for
the working widths
of 28 and 34 cm
The figure shows a
cover for the
working width of 28
cm. In the case of
the working width
of 34 cm, the sides
get mounted to the
edge line of
openings – A.
Fig. 7 : Hoeing device 12 cm
1) Narrow star
2) Axial pin – short
3) Washer
4) Nut M12x1,5
There is no distinction
between the right and left
star
Fig. 8 : Hoeing device 18 cm
1) Regular star
2) Axial pin – short
3) Washer
4) Nut M12x1,5
There is no
distinction between
the right and left
star
