12
13
Q: Why are some of the camera and/or screen control not accessible?
A: Some of the controls can only be accessed when in single screen mode.
Also, you will need tobe out of the detection mode in order to access them
as well.
Q: Why can I not access the settings and playback?
A: You need to be out of detection mode in order to access these settings.
,
Q: Why can t I pan, tilt, and/or zoom?
A: These can only be done by going into single screen mode or that the
camera itself does not support pan, tilt, and/or zoom.
,
Q: I don t have static IP address, can I used DDNS?
A: This program supports DDNS, but you can still access it through IP
address or DNS address.
Q: Why does the viewer not start recording after going into detection mode?
,
A: Double check the channel s recording setup. Make sure that the
,
recording options you set are the correct ones. If it s full-time, it should
record all the time. If triggered, it will record only when camera detects
movement.
,
Q: When I enabled the web server, I can t preview the image of the camera
from other PCs. Why?
A: Please check if the local area connection has the firewall blocking that
particular program and that the IP address is correct.
Q: What does can not connect to following channel(s): CH** mean?
A: It means the viewer can not detect the IP camera. It could be caused by a
bad network setup, make sure that your network is configured correctly.
Q: What does can not import to the following channel(s): CH** mean?
A: It means that another web server is conflicting with another IP address.
Double check your IP address assignment on all your network devices.
Q: What does no buffer space error and virtual RAM insufficient mean?
A: It means your computer is running low on resources (typically means that
your RAM is insuficient). Upgrading your memory will most likely address
this issue. Again, we strongly recommend systems to be equipped with 1
GB of RAM.
Q&A
Specification
General
Operating Frequency 2400~2525
Unobstructed Effective Range 100m(Min.)
Operating Temperature
Operating Humidity
85%RH
-10
~ +50
Power Supply
Image resolution
Video resolution(VGA)
Imaging Sensor Type
View Angle
Night Vision Range
Consumption Current
Power Supply
Image Forma
Video Format
Receive
5V
CMOS
45
3~5M
350
50mA
DC +5V
JPEG
640x480
WMV
640x480
Camera
Item Value
