The M3 System® Delivery Module
16
PRIMING
Warning
Pump should be shut-off when there is
no flow.
Never operate any pumping system with a
blocked suction and/or discharge. You must
take all necessary measures to avoid this
condition.
Use safety equipment according to the
company regulations. Use this safety
equipment within the work area:
• Helmet
• Safety goggles (with side shields)
• Protective shoes
• Protective gloves
Pump’s
priming
To prime the pump:
1. Ensure all piping is secure (delivery, suction
and discharge hose).
2. Ensure the pickup valve is fully submersed,
and the bleed hose is also flowing back
into pick-up basin.
3. Plug in the unit and turn on main power
switch.
4. Press and hold prime button for four
seconds to activate prime cycle.
5. Prime cycle will run continuously for
three minutes and nozzle will begin to
disperse within the cycle time (do not stop
the prime cycle early; even if liquid has
started to disperse through the nozzle as
there still could be air discharging through
the air discharge hose).
6. After the prime cycle is complete, the
system will enter “normal operation mode,”
activating 6 seconds per hour.
Safety
equipment
