“
Global Pool Products is committed to engineering and manufacturing world class products in the pool industry
”
Global Pool Products
1330 Pigeon Rd
Bad Axe, MI 48413
Information contained in this document is proprietary and confidential to
P: 989-269-5900 - TF: 866-712-0606
Global Pool Products and not to be reproduced without
Fax: 989-269-5902
written consent from Global Pool Products.
Page | 18
Installing the inner connections between the ladder and the flume
a.
From bag seven in the hardware kit, use two 3/4” hex bolts, each with one flat washer, insert
them into the two lower connection points inside the ladder
b.
From bag seven in the hardware kit, use one flat washer for each stud, insert them onto the
studs inside the ladder, secure them with hex nuts
c.
Tighten the hex bolts with a short extension and 9/16” socket, tighten the hex nuts with a 9/16”
wrench
d.
RETURN TO THE FOUR BOLTS INSTALLED IN STEP 6 AND TIGHTEN THEM.
e.
Pull the lighting wires and flex hose through the bottom 6” hole at the underside base of the
ladder, consult with a local electrician to
conform to your area’s codes and regulations on
bonding and electrical hook-up.
f.
Turn on the water to the slide to ensure there are no leaks at the connection point of the fitting
to the brass insert or the connection point of the flex hose to the PVC adapter
STEP 7