USER MANUAL
BEAT-MV/BEAT-2
Edition: January 2016
Revision: No. 1
INTRODUCTION
-
9
M
The fusion control boxes which are not being used must be kept out of the reach of
the non authorised personnel. They will have to be kept in rooms of low humidity
degrees and of restricted access.
M
Always use adequate working clothes.
For outside work, it is recommended to use rubber gloves and boots with insulating
soles (in wet areas, this advice is essential), and other applicable personal protective
equipment such as hard hat, safety glasses, etc.
For indoor fusion jointing work, adequate ventilation of the premises must be
provided.
M
Before using the fusion control box, its external condition will have to be checked, as
well as its working condition. All components must be correctly assembled in order to
guarantee the correct functioning of the unit.
M
The damaged components must be repaired or replaced by the After-Sales Service of
STPAcuster.
M
The fusion control box can only be opened by the After-Sales Service of STPAcuster.
M
Should the fusion control box not work properly, it will have to be sent immediately
to the After-Sales Service of STPAcuster.
