USER MANUAL
AcuDrill
DRILLING MACHINE
Edition: June 2016
Revision: No. 4
MODE OF USE
-
31
Figure 42
Figure 43
Figure 44
C
Once the plug and fitting are in contact, turn the shaft clockwise by means of a
3/4" ratchet wrench, open-end spanner, etc. to screw in the plug into its fitting
location. After several turns, the torque resistance will dramatically increase
indicating that the plug has completed its screwing travel. See
Figure 44
.
C
Move the shaft upwards: pull up without turning.
C
Disassembly the plug installation tool and the sandwich valve.
C
Install the fitting exterior plug following the Gas Company established procedure.