manualshive.com logo in svg

Global A-Series, Owner'S Manual

Share
Download
Global A-Series Owner'S Manual Download Page 5

TABLE OF CONTENTS

Section 6  Care and Maintenance ................................................................................................... 6-1

6.1     Cleaning and Disinfecting ..................................................................................................... 6-1

6.2     Cleaning the Microscope Optics ........................................................................................... 6-1

Section 7  Troubleshooting ............................................................................................................. 7-1

7.1     Troubleshooting ..................................................................................................................... 7-1

Section 8  Service and Warranty ..................................................................................................... 8-1

8.1     Warranty Information ............................................................................................................. 8-1

8.2     Technical Services Department ............................................................................................ 8-2

Section 9   Technical Information ................................................................................................... 9-1

9.1     Microscope Support System Specifications

........................................................................ 9-1

9.2     Binocular Focal Lengths........................................................................................................ 9-1

9.3     M A801-LED Storage and Operations Specifications

 ......................................................... 9-2

9.4     A-Series Microscope Total Magnification Chart

 .................................................................. 9-3

9.4     Finding Total Magnification

 ................................................................................................... 9-4

9.5     Effects of Changing Components ......................................................................................... 9-4

Summary of Contents for A-Series









































Reviews:

No comments

Brands by name

Popular brands

Load more brands