![background image](http://html.mh-extra.com/html/global/761224/761224_instruction-manual_2232467006.webp)
Instruction Manual
6
3. MOUNT FOUNTAIN TO WALL
•
Locate and install plumbing through the wall as required. Refer to Rough-In Guide (page 4)
for proper location and correct plumbing.
•
This unit is designed to be installed on a finished wall capable of supporting up to 400 lbs.
Position the mounting plate over plumbing and secure to wall using provided anchor kit (H3)
mounting hardware.
2. INSTALL BUBBLER
2a.
Unscrew and remove
nut and washers from
Bubbler (H4).
2b.
Locate the hole on the drinking
fountain pan surface. Align and
sandwich with the two washers
and tighten the nut to secure
the bubbler.
2c.
Bubbler is now
properly installed.
Anchor kit consists of:
- (4) M10 Nuts
- (4) M10 Lock Washers
- (4) M10 Standard Washers
- (4) M10 Anchors
Nut (x4)
Lock Washer (x4)
Standard Washer (x4)
Anchor (x4)
H3
Anchor Kit
Outdoor Wall Mounted Drinking Fountain