6
Press the stopper(032).
Then pull out the pusher unit(035).
Take off the magazine unit(030) with flat head
screw driver, then clear jam.
Reassemble the magazine unit(030) and the
pusher unit(035).
STOP USING THE TOOL IMMEDIATELY IF ANY OF THE FOLLOWING PROBLEMS
OCCUR. SERIOUS PERSONAL INJURY COULD OCCUR.
PROBLEM
CAUSE
SOLUTION
Excessive jams:
Staple size is wrong.
Use the proper size staple.
.
Uneven clinch
Wrong staple size
Check for proper leg length
adjustment & clincher size.
Teeth (021,023) loose
Tighten teeth (021,023)
Unclinched staple
Teeth (021,023) are broken
Replace teeth (021,023)
CLEARING A JAM FROM THE TOOL
TROUBLE SHOOTING
WARNING
Summary of Contents for 244291
Page 9: ...Model no 244291 ...