![background image](http://html.mh-extra.com/html/global/244291/244291_assembly-instructions-manual_2232483005.webp)
5
Protect your eyes and ears . Wear safety glasses with side shields .
Wear hearing protection . Employers and users are responsible for
ensuring the user or anyone near the tool wear this safety
protection .
To prevent accidental injuries,never place a hand or any other part of
body in the staple clinching area . Never point tool to anyone else .
Never engage in horseplay . Always handle the tool with care .
Check and replace any damaged or worn components of the tool.
The safety warning labels on the tool must also be replaced if they
are not legible
Insert staples into your tool following the instructions on loading the
tool .
Position on box in line with the desired staple location. There is a small
projection on either side of the magazine seat (029) as an aid in locating
the position of the staple . Hold the front end of the tool by pressing on the
top of the body (002). Press down on the handle (025) all the way until it
stops . Release handle (025) and move to the next location .
Strongest closure requires end staples close to end of box . Check
packing requirements .
Check staple clinching in samples of box board being used .
Adjustments for depth of penetration & tightness of clinch are full
advantage should be taken of them .
OPERATING THE TOOL
WARNING
WARNING
NOTE
Summary of Contents for 244291
Page 9: ...Model no 244291 ...