5-Pin Gun Harness Connector
(New ESD PCB not shown)
New Conversion Harness
(Part# 115-0014-01 Rev. C)
DB-25 Connector
Gun Module
New LBH Coin PCB
with 12-Pin Connector
New Computer
Power Supply
Monitor Cable
9-Pin and 6-Pin Connectors
from Game Harness
to Audio Amp Card
Power Cable from Game
Harness wraps around to front
of Audio Amp Card
2-Pin Connector
from Game Harness
Connect Ground Wire from Game
Harness to Ground Stud on
AC Power Plate
Coin Box Ground Stud
9. Install the computer power supply on the cabinet floor next to the computer and LBH Coin PCB using
the velcro provided in the kit.
10. Connect the 4-pin power cable from the power supply you just installed to the LBH Coin PCB.
11. Install the new conversion harness (Part# 115-0014-01 Rev. C) using the following steps. Refer to the
photo above:
– Plug the DB-25 connector on the harness into the computer parallel port.
– Connect the first ground wire on the harness to the AC power plate ground stud.
– Plug the 12-pin connector on the harness into the new LBH coin PCB.
– Plug the 9-pin connector on the harness into the 9-pin connector on the audio Amp card.
– Plug the 6-pin connector on the harness into the 6-pin connector on the audio Amp card.
– Plug the 2-pin connector on the harness into the button harness (next to the gun harness).
– Connect the power cable on the harness to the front of the audio Amp card.
– Connect the second ground wire on the harness to the coin box ground stud.
12. Use tie-wraps to secure the new cable harness in place.
Six Gun Select Joshua OS Upgrade
6
040-1102-01 Rev C 4/27/2004
