globalspecialties.com
1
Safety Summary
A
WARNING
statement calls attention to an operating procedure,
practice, or condition, which, if not followed correctly, could result in
injury or death to personnel.
A
CAUTION
statement calls attention to an operating procedure,
practice, or condition, which, if not followed correctly, could result in
damage to or destruction of parts or the entire product.
To avoid possible electric shock or personal injury, follow these
guidelines:
z
Use the meter only as specified in this manual or the
protection provided by the meter might be impaired.
z
Do not use the meter or test leads if they appear damaged, or
if the meter is not operating properly.
z
Always use proper terminals, switch position, and range for
measurements.
z
Test the meter’s operation on a known voltage before using it
in general. If in doubt, have the meter serviced.
z
Do not apply more than the rated voltage, as marked on the
meter, between terminals or between any terminal and earth
ground.
z
Disconnect circuit power and discharge all high-voltage
capacitors before testing resistance, continuity, diodes, or
capacitances.
z
Do not use the meter around explosive gas or vapor.
z
When using test leads or probes, keep your fingers behind
the finger guards.
z
Only use test leads and accessories that have the same
voltage, category, and amperage ratings as the meter and
that have been approved by a safety agency.
z
Disconnect the test leads from the meter before removing the
battery cover or meter case.
z
Comply with local and national safety requirements when
working in hazardous locations.
z
Use proper protective equipment, as required by local or
national authorities, when working in hazardous areas.
z
Avoid working alone.
Summary of Contents for PRO-50A
Page 1: ...Handheld Digital Multimeter PRO 50A ...
Page 24: ...20160203 ...
