Users Manual
Model 3600
www.globalspecialties.com
Page 8
default parameter settings. Next the timing waveforms of internal code
will be displayed.
Most of functions performed by the logic analyzer are single or non-
cyclical signals included in high speed data streams. The analyzer can’t
display the signals in real-time on the screen as an oscilloscope would,
but it can sample the signals according to certain time rate (sample
clock). The analyzer will catch and save any signal anomalies by setting
up the appropriate trigger process. The saved data can be recalled onto
the screen and analyzed repeatedly.
Keyboard Description
When any pushbutton is pressed, there is a corresponding display on
the screen which explains the function and its operation. If there is a
circular symbol, consisting of two arrows laid end to end, on the left
of the explanation then it is a cycle key. It runs different functions by
pressing it repeatedly. If there is no circular symbol, the pushbutton has
only one function.
Parameters Input
If there are reverse numbers or characters displayed on the screen, this
means the parameter is a selected one which can be set by pressing
the pushbutton. If the user needs to select other data,
【
↑
】
and
【
↓
】
can be used. The user also can turn the knob left and right to select
other cyclical data. If a wrong character or number is input, the user
can delete the one by pressing
【
←
】
. As soon as the reverse character
areas are filled with numbers, the parameter settings take effect. At
this point the
【
←
】
will no longer work, unless the input process is
restarted.
Letter Input
The 26 letters, from A to Z, are marked above 26 keys on the front
panel. During the process of parameter input, press the
【
shift
】
key,
release the shift key, then input the letter desired. If there is no letter
on the key, the user can input a space. The
【
shift
】
key is a single step.
In order to input the next letter, the process above is to be repeated.
Model 3600 User Manual_B.indd 8
7/2/2010 4:41:43 PM
