Components Identification
Remote Programming Button
LED Light
DIP Switches
Jumpers
DO NOT MOVE POSTION UNLESS
INSTRUCTED BY TECHNICAL
SUPPORT
10 Pin Connector
Main Harness Plug
1/4” Male Spade Connectors
CH1 & CH2 Outputs
Mounting Considerations
Choose your mounting location carefully. The Versa7 should be se-
curely mounted in an area that will remain dry, and not be subject to
excessive shock and vibration. Additionally, try not to mount the Ver-
sa7 in a fully enclosed metal area, this will affect the operational
range of the unit.
THE VERSA7 RECEIVER AND REMOTE CONTROL UNITS ARE
NOT WATERPROOF. WARRANTY WILL NOT BE APPLICABLE TO
UNITS THAT HAVE BEEN EXPOSED TO WATER.
Page 3
SIDE A
SIDE B
SIDE C
TYPICAL WIRING
Single Motor Reversing Circuit
Channels 3 and 4 Using Optional Automotive Relays
Page 8
