25
User’s Manual
Heavy Duty Pallet Digital Scale
ERR6
Exceed Zero Range
1.
Ensure the scale is leveled and does
not wobble. Turn it on with no load on the
scale.
2.
Press and hold the “PRINT and
HOLD” key simultaneously for a few of
seconds
3.
The screen will read “C01”
4.
Using the arrow keys, change
C01 to C20. You have to change the
1
st
digit from 0 to 2 before you can
change the 2
nd
digit from 1 to 0.
5.
Press “PRINT” key to enter C20
parameter
6.
Change the value of C20 on the right
to 100 if possible using the up-arrow key.
If 100 is not available change to 20.
7.
Press “PRINT” key to enter your
selection
8.
The screen will read “C21” now
9.
Press “PRINT” key to enter C21
parameter
10.
Change the value on the right of C21
to 100 if available, 20 if not
11.
Press “PRINT” key to enter your
selection
12.
The screen will read “C22” now
13.
Press “TOTAL” key to save and exit
Power the indicator off and then back on.
If these steps do not resolve the ERR6
issue, try following the solutions above for
“nnnnnn” and “uuuuuu” error codes.
