Safety & Energy-Saving Protection:
If a heater is left on continuously for a week (168 hours), the heater will automatically turn off and
then must be restarted.
This heater is equipped with an overheat switch which will cut power to the heater if it senses
overheat in the electronics. Allow the unit to cool down for 15 minutes before attempting to restart.
Initial Use:
Before first use, ensure the emissive (front) surface is free of fingerprints and other contamination
before turning on heater for the first time. There may be an odor or vapor from the heater on initial
use or if heater has not been used for an extended period of time. This is normal.
Maintenance:
WARNING:
Turn off the heater and allow it to cool completely before any maintenance.
The heater may be wiped-down with a clean damp cloth.
DO NOT use abrasive detergents solvents or citrus-based cleaners to clean the heater.
In marine or other corrosive environments, gently spray the unit with clean water.
After cleaning, it is advised to warm the heater for 10 to 20 minutes to dry the unit and prevent
staining.
For additional questions or concerns, contact Global Industrial
Customer Service at 1-800-645-2986 or visit www.globalindustrial.com
