Step 3:
Assemble the heater head
to the stand.
Switch Functions:
O:
Power ON/OFF
I:
50% power
II:
100% Power
Step 4:
Mount base to the floor.
This unit is designed to be installed
on a finished floor surface capable
of supporting 200 lbs.
Secure base to the floor using appropriate
anchor hardware.
Grounding Methods:
This heater is for use on 120 volts. The
cord has a plug with grounding pin as
shown in Figure A. If needed, an adapter
is available for connecting three-prong
grounding-type plugs to two-slot
receptacles (as seen in Figure C). The
green grounding lug extending from the
adapter must be connected to a
permanent ground such as a properly
grounded outlet box. The adapter should
not be used if a three-slot grounded
receptacle is available.
