1. Begin Assembly by attaching short frames (16) and braces (17) to the legs (15) using M6 x 12mm
carriage bolts, 6mm flat washers and M6 hex nuts to create the stand.
2. Attach long frames (18) and braces (19) to assembled legs with the same hardware as mentioned
in the previous step.
M6 Bolt
3. Turn stand assembly upside down and attache 4 rubber
feet (12) using M8 x 25mm socket head bolts, 8mm flat
washers and M8 hex nuts
4. Turn stand assembly right-side up and place Belt Sander
(1) on top of the stand so that the mounting are aligned
and attach using M8 x 16mm hex head bolts, 8mm lock
washers and 8mm flat washers.
5. Mount Work Stop (8) to Belt Sander (1)
using a M8 x 20mm hex head bolt and
8mm flat washer.
M6 Bolt
M8 Bolt
M8 Bolt
M8 Bolt
Work Stop
Combination Sander
5
