MODEL #
18" Industrial Grade Air Needle Scaler
Model: 133716
User's manual
Manual del usuario
Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
IMPORTANT! Read carefully before operating this tool. Failure to operate any
power tool properly can result in personal injury and/or property damage!
Free Speed (BPM) ………………… 4,800
Air Pressure (PSI) ……………………90
Horse Size (ID) ………………………3/8”
Air Inlet (NPT) ………………………1/4”
Stroke ……………………………1-1/8”
Needle Qty …………………………19
Needle Size…………………… 7”x1/8”
Avg. Air Consumption (cfm)……… 4.5
Overall Length……………………18.4”
Weight (Lbs.) ………………………6.2
1
Safety
2
Lubrication
3
Air Supply
1. Always wear approved eye and respiratory protection.
2. Have throttle in “off” position when connecting to air supply.
3. Disconnect tool before performing service, changing accessories, or when not in use.
4. Always be in a safe working distance from others when using tools.
5. Keep tools clean and oiled for best and safest performance.
6. Follow instructions for lubricating and changing accessories.
7. Do not wear loose fitting clothing and remove all jewelry.
8. Always use proper hose and fittings. Never use quick change couplings attached at
tool.
9. Always keep proper footing and balance.
10. Never carry tools by the hose. Keep hoses from heat, oil, and sharp edges. Check
hoses for weak or worn condition before each use, making certain that all connections
are secure.
Lubricate the tool daily with a good grade of air tool oil. The oil can be applied directly
into the air inlet of the tool and then run the tool. A rust inhibitor oil is acceptable for air
tools.
Tools of this class operate on a wide range of air pressure. It is recommended that air
pressure of these tools measure 90 PSI at the tool while running free. Higher pressure
and unclean air will shorten the tool’s life and may create a hazardous condition.
1
