1 / 2
1.1.
0
IDENTIFICATION
AND PROCEDURES
General informations
This chapter covers all the main aspects of the re la
tionship between the Manufacturer and the Ser vice
Centres.
A close collaboration between the Manufacturer and
the Service Centres is conclusive for solving pro
blems in the most effective way as well as main
taining an image of efficiency and reliability.
Compliance with these brief and simple guidelines
will facilitate this task and prevent general misunder
standings and timewasting for both the manufac
turer and the service centre.
Related topics
---
A) Identification
1) Machine
Each machine has a label (1) under the seat which
shows the technical specifications, the model and the
serial number.
The model and serial number must be shown on
each repair sheet when requests are made un der
guarantee, and are indispensable for spare part
orders.
2) Transmission (Rear axle)
The transmission unit (both mechanical and hydro-
static) is made up of an engine block including the rear
axle. This unit is made by another manufactu rer to our
precise technical specifications which diffe rentiate it
from similar items by this same Ma nu fac turer.
The serial number on the label (2) clearly iden
tifies the product and its specifications. This
number must always be quoted when requesting
spa re parts or any information from the Manufac
turer.
3) Engine
The engine is made to precise technical specifications
which differentiate it from similar items by this same
Manufacturer.
The serial number on the label clearly identifies
the product and its specifications. This number
must always be quoted when requesting spare
parts or any information from the Manufacturer.
B) Guarantee validity
The guarantee is supplied under the terms and the
limits of the contractual relations in being. As far as
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
