Manufacturers of Fire Detection Equipment
globalfire.pt
INSTALLATION MANUAL 1.0 - 06/2015
ORION EX MINI-REP
OVERVIEW
IMPORTANT SAFETY NOTES
The ORION EX MINI-REP will provide remote control and system display status from multiple locations to an
Orion based Conventional Fire Alarm system. Its reduced dimensions make it ideal for installation in
reception areas or security booths where it would be impractical and unattractive to install a full size
control panel. ORION EX MINI-REP can be connected to the Orion Conventional Panel using 4 different
interconnecting technologies: RS-232, RS-485, Fiber Optics and TCP/IP . The unit is provided as standard
with an RS-232 interface. Power for the ORION EX MINI-REP can be supplied from the control panel’s
auxiliary power output or an external 24 Volt DC power supply if required.
This equipment must only be installed and maintained by a suitably qualified and technically
competent person.
A basic knowledge and training in the installation of Fire Detection systems is assumed.
The Fire Detection system should be designed by a suitably qualified person with reference to the Local
Regulations and Guidance from the fire Officer where applicable.
All wiring should be carried out with no power present in any part of the fire detection system.