Alarms are approximately twenty seconds in duration before
stopping automatically. Activated alarms can be stopped manually
by pushing the “ST/STP” button once.
Alarms will respond with the alert (sound, vibrate or both) that
has been set in the OPTION Mode.
Programmed alarm times will go off daily based on the Time
Zone set to remain displayed in the calendar mode.
Alarm Mode Screen Abbreviations:
ALM = Alarm
Alarm Mode Programming Instructions:
1)
Press the “MODE” button until “ALARM” is displayed at the top
of the screen. After approximately two second
s “ALM-01” will be
displayed.
2)
Hold down the “SET/RST” button until the number “01” flashes.
3)
Use the “ST/STP” button to select the alarm you would like to set
(“01” –“12”).
4)
Press the “MODE” button. The hour digit(s) will be flashing.
5)
Use the “ST/STP” button to set the hour.