Note:
If a countdown time of less than thirty seconds is set to
repeat, the alert duration will change to approximately one second
before stopping automatically.
REMIND option can be turned “ON‟ or “OFF”. When REMIND
option is turned “ON”, an alert approximately one second in length
will be activated at ten minutes before zero, at 5 minutes before
zero and again at 30 seconds before zero.
Timer Mode Screen Abbreviations:
TMR = Timer , REP =
Repetition
Timer Programming Instructions:
1)
Press the “MODE” button to select either “TIMER1” OR “TIMER
2” to be displayed at the top of the screen.
After approximately two seconds “TMR-1” for TIMER 1 OR “TMR-
2” for TIMER 2 will be displayed.
2) Hold down the
“SET/RST” button until the hour digit(s) flash.
3)
Use the “ST/STP” button to set the hour.
4)
Press the “MODE” button. The minute digit(s) will be flashing.