Global American 2901190, User Manual

Page: 57 / 58

2901190 and 2901200 User’s Manual
Page 57
4.1 Gasket Replacement
A gasket used for a long time may gradually lose its ability to protect the monitor from fluids
and vapors; scratches or dirt may also accumulate. It is recommended that the gasket be
replaced yearly.
NOTE:
If the monitor is mounted vertically, first remove it and place it on a flat, level
surface with the display screen facing down before changing the gasket.
Step 7:
Remove the old gasket from the sides of the monitor.
Step 8:
Attach the new gasket to the monitor. Make sure the gasket fits precisely into the
groove along the edges of the monitor’s front panel (
Figure 4-1
).
Figure 4-1: Gasket Replacement
NOTE:
Compliance with the IP 65 standard depends on correct installation of the gasket.
Be sure to check that the gasket is properly installed after changing it.