PAGE 9
Forks and castors
Assembly:
•
Press bearing housing into bottom of castor tube.
•
Press castor bush into top of castor tube.
•
Slide castor pintle through bearing housing the castor bush.
•
Place circlip on castor pintle.
•
Slide bearing on pintle and locate in bearing housing.
•
Screw hex-nut until there is 1mm of up and down pintle movement.
•
Place castor fork in position and tighten locknut.
Important:
Once tightened ensure 1mm of up and down movement and castor turns freely.
