manualshive.com logo in svg

Glide NipperGlide, User Manual

Share
Download
Glide NipperGlide User Manual Download Page 18

PAGE 18

SECTION 9  

I

  ROUTINE MAINTENANCE

Routine & Scheduled Maintenance

Weekly
1. 

Check tyre pressures

 

Front = 206KPA (30PSI)

 

Rear  = 241KPA (35PSI)

2.  Clean frame and vinyl parts with mild soapy solution.
3.  Wipe upholstery with a clean damp cloth
4.  Check function of electric brakes
5.  Check all cables and connectors are secured; i.e. battery, motors and controller.

Monthly
1. 

Give the chair a general inspection for loose nuts and bolts.

2.  Inspect and clean corrosion from battery terminals and cable connectors.  

Coat with petroleum jelly

Annually

It is advisable to have an annual inspection of the Power Chair performed by an authorised 
Glide Rehabilitation Products Agent. Their knowledge and experience enables them to identify 
and correct problems that might otherwise go undetected. For any questions concerning 
procedures or service, contact your nearest Glide Rehabilitation Products Agent or Glide 
Rehabilitation Products direct.  

NOTE: As stated in our warranty, we recommend that your wheelchair be returned to an 
authorized Glide Rehabilitation Products agent for its free 3 month service check. This is a one 
off free service calculated from date of purchase.

Summary of Contents for NipperGlide























Reviews:

No comments

Brands by name

Popular brands

Load more brands