Section 2.
STANDARD FEATURES
1.
Polished Stainless Steel Frame
2.
Swing Up Arms
3.
Wide P.V.C. Back Strapping
4.
Comfortable Waterproof Self Draining Fiberglass or Cushion Seat
5.
High Impact 560mm (22”) Plastic Wheels
6.
Stainless Steel Axles
7.
Solid Rubber Tyres
8.
Total Locking Swivel 125mm (5”) Castors
9.
Soft Padded Arms
10. Pan Carrier
11. Manual Brakes
12. Swing Away Legrests
13. Maximum Safe Slope 16 Degrees (forward) 12 Degrees (backward) 14 Degrees (transverse)
Section 3.
HOW TO OPERATE YOUR CHAIR
ARMRESTS
The Glide range of commodes all come standard with Flip Up style non -removable armrests. To operate simply lift armrest
up ensuring that it is level with backrest before transferring onto or off commode.
FOOTPLATES – non weight bearing
Your Glide commode will come with 1 of 2 types of footplate depending on the model chosen.
GL15, GL20, GL25 and GL30
– Swing Away and incrementally height adjustable. To adjust height simply un -do and remove
bolt, move footplate to nearest hole to suit desired height, replace and tighten bolt firmly.
The footrests are swing away and detachable. They swing out by either pushing or pulling the release lever.
When lever is released the footplate will simply swing out and lift off the two locating pins.
When refitting footrest to chair ensure that it is located on both locating pins. Damage may resul t if only one pin is used.
GL35 –
Non – Swing Away incrementally adjustable in height.
To adjust height simply un -do and remove bolt, move footplate to nearest hole to suit desired height, replace and tighten bolt
firmly.
Flip up footplates before transfer ring into or out of your commode.
3
2
4
1
9
10
8
7
6
5
