Glide COMFORT-PLUS DELUXE, Owner'S Manual

Page: 6 / 20

2. Gas Operated Reclining Back Rest - to adjust angle simply
depress operating lever located on rear push handle, push
down on rear push handle to move to desired position,
release operating lever. This will lock backrest in position.
ADJUSTING THE SEAT ANGLE (TILT)
The Comfort - Plus Deluxe has as standard, a foot activated, Gas
Operated Tilt function. To adjust, simply press down on foot
pedal, push down on rear push handle to move to desired position,
release foot pedal. This will lock seat in position.
BRAKES
The Comfort - Plus Deluxe, has as standard, foot operated manual
brakes. To apply brakes simply press down on foot pedal. To
release, place foot under foot pedal and lift lever upwards. Ensure
brake is fully retracted.
ADJUSTABLE SEAT WIDTH AND DEPTH
The Comfort - Plus Deluxe wheelchair has an incrementally
adjustable seat frame. This feature will allow for changes in
growth and condition. It is recommended that a Glide
Rehabilitation Products representative make these adjustments.
Note: When changes are made to either seat width or depth, new
upholstery will need to be supplied. Your Glide Rehabilitation
Products Agent will have all the relevant information to assist you
on these changes.
TYRES
The Comfort - Plus Deluxe comes standard, unless otherwise
ordered, with 12 ½
” x 2 ¼ ” pneumatic rear tyres and 7” MCP
(solid) front castors.
Rear tyres need to be inflated to 40 psi.
Pneumatic tyres should be kept at correct inflation. Under inflated
tyres will make it difficult to push and steer.
6