GLENTEK Inc. 208 Standard Street, El Segundo, California 90245, U.S.A. (310) 322-3026
24
GA45-71PR2/76PR2/81PR2/82PR2 MANUAL
ENGINEERING NOTE:
After all systems are aligned and functioning, it is good practice to remove power from the amplifier and,
using a digital ohm-meter, measure the impedance value of the following potentiometer wiper settings with
respect to signal ground. These values may be useful for the next machine you align or for maintenance of
this system at a later date.
1. Tach-Gain potentiometer wiper to common: ohms.
2. Signal-gain potentiometer wiper to common: ohms.
3. Compensation potentiometer wiper to common: ohms.
4. Current limit potentiometer wiper to common: ohms.
5. Signal input to Tach input voltage ratio: volts Signal.
volts Tach.
Date data taken:
Note any changes to compensation components, etc:
