Page
22
of
24
AES67 MODE
The DARK16AO uses a module from Audinate called a Brooklyn Module for its
network audio interface. Audinate are the company behind DANTE®
and as such
the module’s primary network audio protocol is Dante®, however Audinate have
enabled their module to comply with AES67 and therefore the DARK16AO can be
set to AES67 mode for interaction with other AES67 devices.
Please note however that Glensound are relying on Audinate’s AES67 interface and
are unfortunately not able to provide full AES67 support for the unit. AES67 support
should be sought directly from Audinate.
1. Turning On AES67 Mode
If you want to use your DARK16AO on an AES67 network and it has not been set to
AES67 mode then this can be set in Dante® controller by double clicking the
DARK16AO to open the Device View window where you will find an AES67 tab to
enable AES67 support.
Once the AES67 drop down box has been enabled you’ll have to reboot the
Paradiso for the change to take effect. After the reboot go back to the AES67 tab
and set the multicast prefix address to one that is suitable for your newtork.
