Page 22 of 33
AES67 MODE
The Beatrice uses a chipset from Audinate called the Ultimo for its network audio
interface. Audinate are the company behind Dante
TM
and as such the primary network
audio protocol is Dante, however Audinate have enabled their chip to comply with
AES67 and therefore the Beatrice can be set to AES67 mode for interaction with other
AES67 devices.
Please note however that Glensound are relying on Audinate’s AES67 interface and are
unfortunately not able to provide full AES67 support for the unit. AES67 support should
be sought directly from Audinate.
Turning On AES67 Mode
If you want to use your Beatrice on an AES67 network and it has not been set to AES67
mode then this can be set in Dante controller by double clicking the Beatrice to open
the Device View window where you will find an AES67 tab to enable AES67 support.
Once the AES67 drop down box has been enabled you’ll have to reboot the Beatrice for
the change to take effect. After the reboot go back to the AES67 tab and set the
multicast prefix address to one that is suitable for your newtork.
Summary of Contents for DANTE Vita Mini
Page 2: ...Page 2 of 33...
Page 33: ...Page 33 of 33...