Glensound DANTE Vita Mini, Product Details, Page: 19 / 33

Page 19 of 33
CONNECTING THE VITA MINI TO A DANTE
®
NETWORK
The Vita Mini is a network audio device utilizing the reliable and versatile Dante® audio
over IP protocol. Dante® is a proprietary system (although very widely used) the
originators of which are Audinate.
The information below is only meant as a very basic guide. Full details of the power of
Dante® network audio and instructions for using it can be found at
www.audinate.com
Getting Dante Controller
If you are connecting the Vita Mini to a new Dante® network the first thing you will
need to do is to get the free Dante® controller software from Audinate.
This can be downloaded by visiting Audinate’s web site at
www.audinate.com
Connecting Vita’s To A Network
Vita Minis can be connected to the network that you are going to use for your audio
distribution simply by plugging in the network connection on the rear. Once
connected to the network it will be possible to see the Vita Mini from within the Dante®
controller and route the audio circuits.
Audio Over IP Network
We strongly recommend that you consider your network topology carefully and would
not recommend sharing broadcast audio and general data on the same network.
For more details of audio over IP network structure please visit
www.audinate.com