Page
20
of
27
Note if you upload a new DNT file or clear the devices config then the name will
change to Bella 32XX-
xxXxXx whereby the ‘X’s refer to the devices MAC address.
Dante Controller TIP
If you have never run Dante controller before then make sure that on the bottom left
of the Dante controllers’ screen ‘P’ or ‘S’ is next to a green square as this indicates
that it is connected to a network. By clicking
‘P’ or ‘S’ a pop up box opens to allow
you to set what network interface the controller is using.
Summary of Contents for Dante BELLA 32
Page 25: ...Page 25 of 27 SPECIFICATIONS...
